Best Panel Beaters in Auckland

We assessed 99 panel beaters in Auckland and ranked the top 5 on public rating quality, review volume and how recent the reviews are. The businesses listed below hold 3,332 Google reviews between them. No business can pay for a place in these rankings. Last updated 14 November 2026. How we rank

Top 5 Panel Beaters in Auckland

The top 5 panel beaters in Auckland are #1 JR Panel & Paint, #2 Solis Panelbeaters, #3 RJ Don, #4 Mt Roskill Collision Centre, and #5 Panmech, ranked by Top5 Score.

  • 1

    JR Panel & Paint Limited

    ★ 5.0 449 reviews +4 Score 188 -1
    Highest
    5★ 444 3★ 1 1★ 4

    JR Panel & Paint takes on collision repairs, rust work, and full paint refinishing, returning cars that reviewers describe as looking brand new.

    64 Elizabeth Knox Place, St Johns, Auckland

    Call 09 574 5876 Map Is this your business?
  • 2

    Solis Panelbeaters LTD

    Verified ↑ 1
    ★ 4.9 350 reviews +2 Score 184
    4.6 behind
    5★ 342 4★ 3 2★ 1 1★ 4

    Solis Panelbeaters has come in at nearly half the price of competing quotes on accident repairs, bumper work, and paint blending, with the finished result holding up to close inspection. A courtesy car, insurance claim coordination, and a complimentary full valet on handback are part of the standard experience, not extras you negotiate for.

    7/1 Portage Road, New Lynn, Auckland Mon–Fri 6am–4pm · Sat 6am–12pm · Sun Closed

    Call 09 826 1616 Map
  • 3

    R J Don Panelbeaters

    ↓ 1
    ★ 4.9 396 reviews +4 Score 184
    4.7 behind
    5★ 371 4★ 18 3★ 2 1★ 5

    RJ Don fixes everything from bumper reshaping and dent repairs to structural rust, paint chips, and collision damage across the whole car.

    124 Wairau Road, Wairau Valley, Auckland

    Call 09 444 9292 Map Is this your business?
  • 4

    Mt Roskill Collision Centre

    ↑ 6
    ★ 4.8 370 reviews +5 Score 181 +10
    7.8 behind
    5★ 335 4★ 15 3★ 2 2★ 2 1★ 16

    Mt Roskill Collision Centre manages rear-end collision repairs, door dents, side mirror replacements, and scratch work, returning vehicles that reviewers describe as looking brand new.

    42 Carr Road, Three Kings, Auckland

    Call 0800 227 762 Map Is this your business?
  • 5

    Panmech Panelbeaters

    ↓ 1
    ★ 4.9 336 reviews Score 178
    10.3 behind
    5★ 324 4★ 8 2★ 1 1★ 3

    Panmech coordinates insurance repairs, bumper replacements, scratch polishing, and collision damage, with clients regularly describing their car coming back looking brand new.

    14 Eden Street, Newmarket, Auckland

    Call 09 520 4005 Map Is this your business?

More rankings

Auckland panel beaters by area 3 links
More services in Auckland 5 links
Panel Beaters elsewhere in New Zealand 3 links

Before you book a panel beater in Auckland

Panel and paint work, whether a minor dent or a full collision repair, is hard to judge until months later when paint fails or rust appears. Ask whether the panelbeater uses genuine or aftermarket parts, what paint system they use, and what warranty they offer on the repair. If going through insurance, confirm they are an approved repairer.

The questions below are drawn from 192 customer reviews collected for this page.

What does panel beating typically cost in New Zealand?

Minor dents and scratches in New Zealand run from around $150 to $500, depending on panel size and paint complexity. Bumper repairs and single-panel damage such as a crumpled door sit between $500 and $2,000.

Structural or multi-panel work can push past $5,000, and a full respray ranges from $3,000 to $8,000 or more for larger vehicles. Insurance jobs work differently: your insurer assesses the repair value, you pay your excess, and any gap between their assessment and your chosen repairer's quote may come out of your pocket.

Does my insurer have to use their preferred panel beater, or can I choose my own?

Your insurer can recommend a preferred repairer, but under New Zealand law they cannot flatly refuse your right to choose your own panel beater. The practical catch is that if your chosen repairer quotes higher than the insurer's assessed value, you may need to cover the difference yourself.

Some policies also tie their repair warranty to preferred repairers, so read your policy wording before lodging a claim. If you feel pressured into using a specific repairer against your wishes, the Insurance and Financial Services Ombudsman (IFSO) is the free dispute resolution body that handles exactly these complaints.

Will my car be repaired with genuine parts, or non-genuine substitutes?

New Zealand insurance policies legally allow the use of aftermarket or non-genuine parts unless your policy specifically requires genuine manufacturer parts, so check your policy wording before any work starts. Aftermarket parts vary in quality and may not match the fit or safety tolerances of original equipment manufacturer parts, which matters most on structural panels or safety-related components. Ask your repairer in writing what parts will be used; if you want genuine parts and your policy does not require them, you can request them but expect to pay the cost difference, and if a repairer or insurer refuses to disclose parts sourcing, you can raise a complaint through the Insurance and Financial Services Ombudsman (IFSO) Scheme at no cost.

What are the warning signs of a panel beater you shouldn't use?
  • –A shop that gives a rough verbal price without a written, itemised quote is leaving itself room to charge more once your car is pulled apart.
  • –Painting directly over rust without treating it first is a common shortcut, one negative review described rust reappearing within weeks because no rust converter was used.
  • –Returning a vehicle with new damage and then claiming it was pre-existing is a documented complaint pattern, especially when drop-off photos contradict the claim.
  • –Poor colour matching, visible orange peel in the blended areas, or uneven panel gaps suggest the shop is not investing in proper preparation or paint mixing.
  • –A shop that goes quiet mid-repair, fails to communicate delays, and only responds when you escalate is a sign that project management is not being taken seriously.
  • –Asking for full payment before work is complete removes your main point of leverage if the job is left unfinished or below standard.
What should you ask before approving panel beating work?
  • –Ask whether they will liaise directly with your insurer and handle supplementary claims if hidden damage is found once panels are removed.
  • –Confirm how they communicate delays: a good shop will proactively update you, not leave you chasing them, as regular updates throughout the repair were a standout positive in multiple reviews.
  • –Ask specifically how they handle hidden or additional damage discovered mid-repair, and whether they will get your sign-off before proceeding with extra work.
  • –Ask about their colour-matching process, including whether they blend surrounding panels, since a precise paint match on a rare or older colour was called out as important by more than one customer.
  • –Find out whether a courtesy car is available and through what arrangement, as some shops offer their own loan vehicles while others access them through third-party providers like Right2Drive.
  • –Ask what their rectification process is if you are not satisfied with the finished result, including whether repairs carry any written workmanship guarantee.
Top 5 Panel Beaters in Auckland badge

Run one of these businesses?

Verify your listing and put this badge on your own website. It's free, takes two minutes, and the badge keeps up with your rank at every check.

Verify and get your badge

About this ranking

What the 10 panel beaters listed above hold, at the 14 November 2026 check.

449
reviews held by the #1 ranked business
336
reviews held by the #5 ranked business
4.7
lowest rating among the 10 listed
2.0%
of their 3,332 reviews are one-star

We first assessed panel beaters in Auckland in March 2026 and have rechecked the ranking five times since. JR Panel & Paint has held first place at every check, and Solis Panelbeaters, RJ Don and Panmech have been in the top 5 alongside it throughout.

What has changed since March 2026?
Nov 2026

Mt Roskill Collision Centre entered the top 5, up from #10. Cameron Panelbeaters left the top 5, down to #7.

Oct 2026

Chapman Collision and Mt Roskill Collision Centre entered the list, at #8 and #10.

Sep 2026

Bodyworks Panelbeaters returned to the list at #8.

May 2026

Cameron Panelbeaters entered the top 5, up from #6. Wagstaff European left the top 5, down to #6.

Mar 2026

First check. JR Panel & Paint #1.

We updated the scoring method in May, July and October 2026. See what changed.

Months where nothing changed at the top are not listed.

How are the top panel beaters in Auckland chosen?

We build this page from Google Maps results for panel beaters in Auckland. Each one is scored on its public rating and review record, using the same published method on every page. Businesses outside the area, or whose reviews describe a different line of work, are left out. Every category and city is rechecked on a rolling cycle, about every two to three months. See how we rank for how rankings are made and who is left out.

Are you a panel beater in Auckland?

No business can pay for a place in these rankings. Claiming and verifying your listing is free: it adds a small trust bonus (+3 points) to your score, for confirming a real operator stands behind the listing, and gives you a dashboard showing how your score is made up. A paid subscription adds a website link, a profile page and your ranking history. Claim your listing or see what a subscription includes.

Not listed? The usual reasons are a Google Business category that does not match, too few reviews to score near the top, or an address outside the area we cover. Check where you rank first, and if you think we missed you, get in touch.

How far is each one from you?

Type your suburb or use your location, and we'll show the distance on every card. The order stays the same.